Lencore Spectra i.Net: Sound Manager 2.0 Manual do Utilizador descarregar pdf (Página 5)

USING THE

Connect a computer to the i.LON’s 10/100 base T connector

using a computer data cable with an RJ-45 connector.

The computer (not the i.LON) must be configured to have

an IP address that is different from the i.LON’s IP address

(other than 192.168.100.225). For example, a good IP

address for the computer is 192.168.100.200. Consult with

an IT profes- sional if you do not understand these

instructions.

To configure the computer that is directly connected to the

i.LON, complete the

following:

Turn the computer on, allow the computer to boot completely,

plug in using the data cable from the computer to the i.LON,

or log on through a wireless connection (router).

• Go to the ‘Start’ button and click

• Go to ‘Connect To’ button and click (if not available, go to the

control panel and click ‘Networks & Internet Connections’

and click)

• Go to ‘Show All Connections’ (may say ‘Show Network

Connections’) and click

• Right click ‘Local Area Connection’

• Go to ‘Properties’ and click – A pop-up screen will appear

• Go to the window in the Pop-up Box titled “This Connection

Uses the Following Items”

• Scroll down to the last item in this box and highlight

‘Internet Protocol (TCP/ IP)’

• Once highlighted, click the ‘Properties’ button below the box

• Click on “Use the Following IP address”

• In the box labeled “IP Address:” put in the following address:

192.168.100.200

• Next, click the ‘Tab’ button on your computer

• The box labeled ‘Subnet Mask:’ will automatically fill in with

255.255.255.0

• Press Ok/Close on the box and then close the dialog box

• Your computer is now ready to talk to the i.LON

WINDOWS XP

USER OPERATION

IP Address 192.168.100.225

USING THE SOUND MANAGER ON-SITE

(MOST COMMON USAGE):

1 2 3 4 5 6 7 8 9 10 ... 43 44

Sem comentários

Lencore Spectra i.Net: Sound Manager 2.0 Manual do Utilizador Página 5